Dr Stan Zurek

DSc, PhD, CEng, SMIEEE, MIET, mgr inż.

I graduated as mgr inż. (MSc) at Czestochowa University of Technology, Poland in 2000, and with a PhD degree at Wolfson Centre for Magnetics, Cardiff University, UK in 2005, where I continued to work as a Research Associate.

In 2008 I joined Megger Instruments Ltd where I currently hold the position of Head of Research & Innovation in the R&D department, being responsible for all aspects of electromagnetic technologies.

I have been IEEE Senior Member from 2010. I authored and co-authored over 100 scientific papers and I am a named co-inventor on 13 patents. I published a book on measurements of rotational power loss: Characterisation of Soft Magnetic Materials Under Rotational Magnetisation.

In 2020 I graduated with a D.Sc. degree at Łódź University of Technology, Poland.

https://orcid.org/0000-0002-4128-5490

. . . . .

1. Rygal R., Zurek S., Soinski M., Properties of magnetic cores made out of nanocrystalline ribbons, Elektronizacja, Nr 7-8, 2000, p. 6-8, (in Polish: Podstawowe własciwości rdzeni z tasm magnetycznych o strukturze nanokrystalicznej), link

2. Bajorek R., Bajorek J., Zurek S., Pluta W., Rygal R., Soinski M., A compact single sheet tester for investigation of both alternating and rotational magnetisation, Proceedings of 6th International Workshop on 1&2 Dimensional Magnetic Measurement and Testing, Bad Gastein, Austria, September 2000, link

3. Zurek S., Rotational magnetisation in thin soft magnetic materials, M.Sc. thesis, Czestochowa University of Technology, September 2000, (in Polish: Przemagnesowanie obrotowe w materialach magnetycznie miekkich plaskich, praca magisterska, Politechnika Czestochowska)

4. Rygal R., Zurek S., Soinski M., Nanocrystalline ribbons in anti-interferential chokes, Radioelektronik nr 10/2000, p. 20-21, (in Polish: Taśmy nanokrystaliczne w dławikach przeciwzakłóceniowych), link

5. Piaszczyk A., Zurek S., Rygal R., Soinski M., Magnetic shielding of busway in the low voltage station with the use of electrical steel sheet, Wiadomosci Elekrotechniczne (Electrotechnical News), Nr 7/8, 2001, p. 304-306, (in Polish: Ekran magnetyczny szynoprzewodu w stacji niskiego napięcia z wykorzystaniem blach elektrotechnicznych), link

6. Moses A. J., Meydan T., Zurek S., Potential problems in interpretation of angular variation of B and H in electrical steel under rotational magnetisation conditions, Proceedings of 11th International Symposium on Applied Electromagnetics and Mechanics (ISEM), Versailles, France, May 2003, link

7. Zurek S., Meydan T., Digital feedback controlled RSST system, Proceedings of 16th Soft Magnetic Materials Conference (SMM), Dusseldorf, Germany, September 2003

8. Zurek S., Two-dimensional magnetisation system, Operation manual, Wolfson Centre for Magnetics Technology, Cardiff University, September 2003

9. Zurek S., Marketos P., Meydan T., Control of arbitrary waveforms in magnetic measurements by means of adaptive iterative digital feedback algorithm, Przeglad Elektrotechniczny, Nr 2/2004, February 2004, p. 122-125 , link

10. Zurek S., Two-dimensional magnetisation problems in electrical steels, PhD thesis, Cardiff University, Cardiff, UK, March 2005, link

11. Zurek S., Meydan T., Correction of triggering and interchannel delay in alternating and two-dimensional measurements of magnetic properties, Przeglad Elektrotechniczny, Nr 5/2005, p. 78-81, linklink

12. Zurek S., Marketos P., Meydan T., Moses A. J., Use of novel adaptive digital feedback for magnetic measurements under controlled magnetizing conditions, IEEE Transactions on Magnetics, Vol. 41, No. 11, November 2005, p. 4242-4249, http://doi.org/10.1109/TMAG.2005.854438

13. Zurek S., Moses A.J., Adaptive iterative digital feedback algorithm for measurements of magnetic properties under controlled magnetising conditions over a wide frequency range, Przeglad Elektrotechniczny, Nr 12/2005, Dec 2005, p. 5-8, linklink

14. Tumanski S., Principles of electrical measurement, Taylor & Francis, London, 2006, ISNB 978-0750310383, p. 446-448, (S. Zurek wrote a section of a chapter on digital measurements)

15. Zurek S., Moses A.J., Packianather M., Implementing an Artificial Neural Network Using National Instruments LabVIEW, Customer Solutions, National Instruments, Feb 2006, link

16. Zurek S., Prediction of magnetic properties of wound toroidal cores by means of artificial neural networks, SET for Britain, House of Commons, London, UK, March 2006

17. Zurek S., Meydan T., Differences in clockwise and anticlockwise rotational power losses measured under controlled flux density and magnetic field in electrical steels, Przeglad Elektrotechniczny, Nr 05/2006, p. 11-15, linklink

18. Patel H.V., Zurek S., Meydan T., Jiles D.C., L. Li, A new adaptive automated feedback system for Barkhausen signal measurement, Sensors and Actuators A-Physical, Vol. 129 (2006), Issues 1-2, p. 112-117, http://doi.org/10.1016/j.sna.2005.11.026, link

19. Zurek S., Meydan T., A novel capacitive flux density sensor, Sensors and Actuators A-Physical, Vol. 129 (2006), Issues 1-2, p. 121-125, https://doi.org/10.1016/j.sna.2005.11.027, link

20. Thant P.P.P., Zurek S., Meydan T., Walmsley D., Control of tip oscillation in magnetostrictive dental scalers, Sensors and Actuators A-Physical, Vol. 129 (2006), Issues 1-2, p. 167-171, http://doi.org/10.1016/j.sna.2005.11.036, link

21. Katranas G.S., Meydan T., Zurek S., Ovari T.A., Borza F., A novel frequency modulation based system using bi-layer thin film displacement sensors, IEEE International Magnetics Conference, INTERMAG, 8-12 May 2006, p. 517 link

22. Moses A.J., Anayi F., Sagarduy J., Zurek S., Additional Losses in Inverter Driven Electrical Machines, Proceedings of International Workshop Magnetism and Metallurgy, Freiberg, Germany, June, 2006, link

23. Pluta W., Rygal R., Soinski M., Zurek S., Shielding of current transformers used in electronic energy meters from harmful impact of external NdFeB magnets, Proceedings of 18th International Symposium and Exhibition on Electromagnetic Compatibility, (EMC 2006), Wroclaw, Poland, June 2006

24. Kepski P., Pytlech R., Pluta W., Rygal R., Soinski M., Zurek S., Harmful influence of rare-earth magnets on a low-voltage current transformer as the evidence of the lack of EMC compatibility, 18th International Wroclaw Symposium and Exhibition on Electromagnetic Compatibility, Proceedings of (EMC 2006), Wroclaw, Poland, June 2006

25. Zurek S., Meydan T., Errors in the power loss measured in clockwise and anticlockwise rotational magnetisation, Part 1: Mathematical study, IEE Proceedings, Science, Measurement & Technology, Vol. 153, No. 4. July 2006, p. 147-151, http://doi.org/10.1049/ip-smt:20050072 linklink

26. Zurek S., Meydan T., Errors in the power loss measured in clockwise and anticlockwise rotational magnetisation, Part 2: Physical phenomena, IEE Proceedings, Science, Measurement & Technology, Vol. 153, No. 4. July 2006, p. 152-157, http://doi.org/10.1049/ip-smt:20050073 linklink

27. Zurek S., Meydan T., Rotational power losses and vector loci under controlled high flux density and magnetic field in electrical steel sheets, IEEE Transactions on Magnetics, Vol. 42, No 10, 2006, p. 2815-2817, http://doi.org/10.1109/TMAG.2006.879907 link

28. Zurek S., Meydan T., Moses A. J., Analysis of twisting of the wires as a method reducing the influence of stray field on accuracy of magnetic measurements, Sensor Letters, Vol. 5, No. 1, 2007, p. 255-258, http://doi.org/10.1166/sl.2007.079 link

29. Zurek S., LabVIEW as a tool for measurements, batch data manipulations and artificial neural network predictions, National Instruments, Curriculum Paper Contest, reprinted in Przeglad Elektrotechniczny, Nr 4/2007, p. 114-119, link

30. Zurek S., Marketos P., Anderson P., Moses A. J., Influence of digital resolution of measuring equipment on the accuracy of power loss measured in the Epstein frame, Przeglad Elektrotechniczny, Nr 4/2007, p. 50-53, linklink

31. Soinski M., Rygal R., Pluta W., Kepski P., Zurek S., Influence of external stationary magnetic fields on measuring devices, Przeglad Elektrotechniczny, Nr 4/2007, p. 88-92, link

32. Marketos P., Zurek S., Moses A.J., A method for defining the mean path length of the Epstein frame, IEEE Transactions on Magnetics, Vol. 43, No. 6, 2007, p. 2755-2757, http://doi.org/10.1109/TMAG.2007.894124 link

33. Zurek S., Sagarduy J., Moses A.J., Practical implications and influence of PWM magnetisation parameters on iron losses in electrical steel, Proceedings of 18th SMM Conference, Cardiff, UK, September 2007, link

34. Zurek S., Some interesting observations of loss and magnetism in soft magnetic materials under non-standard conditions, Proceedings of UK Magnetic Society Seminar, Cardiff, UK, September 2007, link

35. Zurek S., Fascinating world of magnetism, Proceedings of Women's Engineering Society Conference, Cardiff, UK, September 2007

36. Moses A.J., Marketos P., Zurek S., Effect of DC Voltage on AC Magnetisation of Transformer Core Steel, Proceedings of 13th ISEM, East Lansing, Michigan, USA, September 2007, link

37. Moses A.J., Konadu S. N., Zurek S., Losses due to the transverse component of flux density in grain oriented electrical steels, Journal of Optoelectronics and Advanced materials 10-5, May 2008, pp. 1110-1114, ISSN 1454-4164, link

38. Umenei E., Melikhov Y., Zurek S., Jiles D., Modelling For a Magnetic Inductive Fault Current Limiter, Speaking of Science Conference, May 2008

39. Zurek S., Al-Naemi F., Moses A. J., Finite element modelling and measurements of flux and eddy current distribution in toroidal cores wound from electrical steel, IEEE Transactions on Magnetics, Vol. 44, No. 6, June 2008, p. 902-905, link

40. Moses A.J., Marketos P., Zurek S., Zirka S., New challenges in characterisation of electrical steels, 3rd International Workshop on Magnetism and Metallurgy, Ghent, Belgium, June 2008

41. Moses A.J., Zurek S., (Editors), Journal of Magnetism and Magnetic Materials, Conference Issue, Soft Magnetic Materials Conference SMM18, 2008, link

42. Umenei A.E., Melikhov Y., Zurek S., Jiles D.C., Measurement and modelling of magnetic properties of electrical steels at high flux densities, International 1&2DM Workshop, September 2008, Cardiff, UK, link

43. Zurek S., Moses A. J., Packianather M., Anderson P., Anayi F., Prediction of power loss and permeability with the use of an artificial neural network in wound toroidal cores, Journal of Magnetism and Magnetic Materials, Vol. 320, Issue 20, October 2008, p. e1001-e1005, http://doi.org/10.1016/j.jmmm.2008.04.177 link

44. Zurek S., Al-Naemi F., Moses A. J., Marketos P., Anomalous B-H behaviour of electrical steels at very low flux density, Journal of Magnetism and Magnetic Materials, Vol. 320, Issue 20, October 2008, Pages 2521-2525, http://doi.org/10.1016/j.jmmm.2008.04.041 link

45. Marketos P., Zurek S., Moses A.J., Calculation of the mean path length of the Epstein frame under non-sinuoidal excitation using the two Epstein method, Journal of Magnetism and Magnetic Materials, Vol. 320, Issue 20, October 2008, p. 2542-2545, http://doi.org/10.1016/j.jmmm.2008.04.085 link

46. Leicht J., Moses A.J., Zurek S., Hysteresis loss component under non-sinusoidal flux waveforms in electrical steels, Journal of Magnetism and Magnetic Materials, Vol. 320, Issue 20, October 2008, Pages e608-e610 http://doi.org/10.1016/j.jmmm.2008.04.017 link

47. Ragusa C., Zurek S., Appino C., Moses A.J., An intercomparison of rotational loss measurements in non-oriented Fe-Si alloys, Journal of Magnetism and Magnetic Materials, Vol. 320, Issue 20, October 2008, p. e623-e626, http://doi.org/10.1016/j.jmmm.2008.04.051, link

48. Chojnacki J., Liszewski P., Soinski M., Rygal R., Pluta W., Zurek S., Pinkosz P., Harmonic Distortion of Magnetizing Current in Combined Wound Toroidal Cores, IEEE Transactions on Magnetics, Vol. 44(11), Nov 2008, p. 3816-3819, http://doi.org/10.1109/TMAG.2008.2002189 link

49. Zurek S., Kutrowski T., Moses A.J., Anderson P., Measurements at very low flux density and power frequencies, Journal of Electrical Engineering, Vol. 59, No 7/s, 2007, p. 7 link

50. Zureks S. (guest editor), Przegląd Elektrotechniczny, Conference issue, International 1&2DM Workshop 2008, 1/2009, link

51. Zurek S., Rygal R., Soinski M., Asymmetry of magnetic properties of conventional grain-oriented electrical steel with relation to 2D measurements, Przegląd Elektrotechniczny, 1/2009, p. 16-19, link

52. Zurek S., Quasi-static and dynamic rotational losses in non-oriented electrical steel sheet, Przegląd Elektrotechniczny, 1/2009, p. 89-92, link

53. Baranowski S., Tumanski S., Zurek S., Comparison of digital methods of the control of flux density shape, Przegląd Elektrotechniczny, 1/2009, p. 93-95, link

54. Somkun S., Moses A.J., Zurek S., Anderson P.I., Development of an induction motor core model for measuring rotational magnetostriction under PWM magnetisation, Przegląd Elektrotechniczny, 1/2009, p. 103-107, link

55. Zurek S., Marketos P., Tumanski S., Patel H.V., Moses A.J., Correlation between surface magnetic field and Barkhausen noise in grain-oriented electrical steel, Przegląd Elektrotechniczny, 1/2009, p. 111-117, link

56. Zurek S., FEM simulation of effect of non-uniform air gap on bulk permeability of cut cores, IEEE Transactions on Magnetics, Vol. 48 (4), April 2012, p. 1520-1523, http://doi.org/10.1109/TMAG.2011.2172928 link

57. Zurek S., Differences in parameters of Ni-Fe wound toroidal cores supplied by industrial manufacturers, IEEE Transactions on Magnetics, Vol. 48 (4), April 2012, p. 1371-1374, http://doi.org/10.1109/TMAG.2011.2171332 link

58. Kozlowski A., Zurek S., DC magnetic field generator with spatial coils arrangement, Scientific Research of the Institute of Mathematics and Computer Science 3(11) 2012, p.81-92, link

59. Kozlowski A., Zurek S., Rygal R., Influence of the Number of Excitation Coils on Uniformity of Distribution of Magnetic Flux Density in an Air Gap, International Workshop on 1&2 Dimensional Measurement and Testing, September 2012, Vienna, Austria, link

60. Soinski M., Pluta W., Zurek S., Metrological attributes of current transformers in electrical energy meters, International Workshop on 1&2 Dimensional Measurement and Testing, September 2012, Vienna, Austria, link link

61. Kozłowski A., Rygał R., Zurek S., Large DC electromagnet for semi-industrial thermomagnetic processing of nanocrystalline ribbon, IEEE Transactions on Magnetics, Vol. 50 (4-1), 2014, p. 8000404 http://doi.org/10.1109/TMAG.2013.2288322 link link

62. Zurek S., Qualitative analysis of Px and Py components of rotational power loss, IEEE Transactions on Magnetics, Vol. 50 (4-2), 2014, p. 1-14, http://doi.org/10.1109/TMAG.2013.2291225 link

63. Zurek S., Two rotational loss Py=f(Px) curve types in electrical steels, Proceedings of 11th 1&2DM Workshop, Turin, Italy, 2014, p. 66

64. Zurek S., Rotational magnetisation, Transformers Magazine, Vol. 2 (2), 2015, pp. 44-51 link

65. Zurek S., Current transformers in diagnostics of electrical insulation and earthing, presented at UK Magnetics Society seminar: Electromagnetic Measurements: Design, Application and Challenges, QinetiQ, Portland Bill, UK, June 2015, link

66. Zurek S., Effect of shunt resistor value on the measurements of magnetic properties, International Journal of Applied Electromagnetics and Mechanics, Vol. 48 (2,3), 2015, pp. 187-194, http://doi.org/10.3233/JAE-151986 link

67. Zirka S.E., Moroz Y.I., Steentjes S., Hameyer K., Chwastek K., Zurek S., Harrison R.G., Dynamic magnetization models for soft ferromagnetic materials with coarse and fine domain structures, Journal of Magnetism and Magnetic Materials, Vol. 394, 2015, p. 229-236, http://doi.org/10.1016/j.jmmm.2015.06.082 link

68. Zurek S., Demagnetisation of grain-oriented electrical steels (GOES), Transformers Magazine, Vol. 2 (4), 2015, pp. 32-37 link

69. Zurek S., Qualitative 3D FEM study of B and H distribution in circular isotropic samples for two-dimensional loss measurements, Przeglad Elektrotechniczny, R. 91, NR 12/2015, 2015, pp.45-50 http://doi.org/10.15199/48.2015.12.09 link

70. Zurek S., Qualitative FEM study of proximity loss reduction by various winding configurations - Part I, Transformers Magazine, Vol. 3 (1), 2016, pp. 70-76

71. Zurek S., Qualitative FEM study of proximity loss reduction by various winding configurations - Part II, Transformers Magazine, Vol. 3 (2), 2016, pp. 72-77

72. Zurek S., FEM modelling and experimental validation of proximity loss, Transformers Magazine, Vol. 4 (1), 2017, pp. 102-108, link

73. Zurek S., El-Rasheed A., Ohlen M., Individual temperature correction (ITC) for insulation resistance measurements, Proceedings of INSUCON 2017 (International Electrical Insulation Conference), 16-18 May 2017, Birmingham, UK

74. Zurek S., Sensitivity to off-axis vector components of typical wire wound flat H-coil configurations, IEEE Sensors Journal, Vol. 17 (13), 2017, p. 4021 http://doi.org/10.1109/JSEN.2017.2704599

75. Zurek S., Example of vanishing anisotropy at high rotational magnetisation of grain-oriented electrical steel, Przeglad Elektrotechniczny, R. 93 NR 7/2017, 2017, p. 15-17, http://doi.org/10.15199/48.2017.07.04

76. Zurek S., Practical implementation of universal digital feedback for characterisation of soft magnetic materials under controlled AC waveforms, Przeglad Elektrotechniczny, R. 93 NR 7/2017, 2017, p. 18-23, http://doi.org/10.15199/48.2017.07.05

77. Zurek S., Theoretical concept and FEM simulations of improved shielding for round horizontal yokes for rotational power loss measurement, Journal of Electrical Engineering, Vol. 68 (4), 2017, pp. 267-273, http://doi.org/10.1515/jee-2017-0038

78. Zurek S., Borowik P., Chwastek K., Power loss anisotropy in various electrical steels (in Polish: Anizotropia stratnosci wybranych blach elektrotechnicznych), Presented at conference: Zastosowania Elektromagnetyzmu w Nowoczesnych Technikach i Medycynie, Mierzecin, Poland, 18-21 June 2017, published: Przegląd Elektrotechniczny (Electrical Review), R. 94, NR 2/2018, 2018, pp. 96-99, http://doi.org/10.15199/48.2018.02.23

79. Zurek S., Borowik P., Chwastek K., Prediction of anisotropic properties of grain-oriented steels based on magnetic measurements, Presented at Magnetic Measurements Conference, Prague, Czech Republic, 17-19 September 2017, published in: Journal of Electrical Engineering, Vol. 69 (2018), NO6, pp. 470-473, http://doi.org/10.2478/jee-2018-0078

80. Zurek S., Characterisation of Soft Magnetic Materials Under Rotational Magnetisation, Taylor & Francis / CRC Press, 2017, ISBN 978-1-138-30436-9 link

81. Zurek S., Systematic errors of local B-coils due to holes, Przegląd Elektrotechniczny, R. 94, NR 3/2018, 2018, p. 6, http://doi.org/10.15199/48.2018.03.02

82. Zurek S., Effect of off-axis H-coil sensitivity on clockwise-anticlockwise differences of rotational power loss in isotropic samples, IET Science, Measurement & Technology, Vol. 12 (4), 2018, p. 507, http://doi.org/10.1049/iet-smt.2017.0385 link

83. Zurek S., Optimum magnetising apparatus for standardised measurements of rotational power loss, presented at International Workshop on 1&2 Dimensional Measurement and Testing, Grenoble, France, Sep 2018

84. Rygal R., Zurek S., Pluta W., Leszczynski J., Soinski M., Walak J., Rygal J., Universal modular high power wide frequency range controlled system for magnetic measurements, presented at International Workshop on 1&2 Dimensional Measurement and Testing, Grenoble, France, Sep 2018

85. Roman R., Pluta W., Zurek S., Leszczynski J., Soinski M., Rygal R., Galvanicaly separated voltage and current sensors used in industrial magnetic core measurements, presented at International Workshop on 1&2 Dimensional Measurement and Testing, Grenoble, France, Sep 2018

86. Zurek S., Rygał R., Novel H-coil design with improved immunity to off-axis H components, International Journal of Applied Electromagnetics and Mechanics, Vol. 61 (S1), 2019, p. S49–S56, https://doi.org/10.3233/JAE-199329, link (presented at International Workshop on 1&2 Dimensional Measurement and Testing, Grenoble, France, 24-26 Sep 2018)

87. Bramerdorfer G., Kitzberger M., Wöckinger D., Koprivica B., Zurek S., State-of-the-art and future trends in soft magnetic materials characterization with focus on electric machine design, Part 1, tm - Technisches Messen, Vol. 86 (10), pp. 540-552, https://doi.org/10.1515/teme-2019-0065

88. Bramerdorfer G., Kitzberger M., Wöckinger D., Koprivica B., Zurek S., State-of-the-art and future trends in soft magnetic materials characterization with focus on electric machine design, Part 2, tm - Technisches Messen, Vol. 86 (10), pp. 553–565, https://doi.org/10.1515/teme-2019-0066

89. Zurek S., Koprivica B., Chwastek K., Extended T(x) hysteresis model with magnetic anisotropy, 15th Selected Issues of Electrical Engineering and Electronics (WZEE), Zakopane, Poland, 8-10 Dec 2019, https://doi.org/10.1109/WZEE48932.2019.8979908

90. Koprivica B., Zurek S., Separation of rotational power loss components for CGO and NO electrical steels in time domain based on vector analysis, IEEE Transactions on Magnetics, Vol. 57 (8), 2021, pp. 1-12, Art no. 6302212, https://doi.org/10.1109/TMAG.2021.3087226

91. Ducharne B., Zurek S., Daniel L., Sebald G., An anisotropic vector hysteresis model of ferromagnetic behavior under alternating and rotational magnetic field, Journal of Magnetism and Magnetic Materials, Vol. 549, 2022, 169045, https://doi.org/10.1016/j.jmmm.2022.169045

92. Ducharne B., Zurek S., Sebald G., A universal method based on fractional derivatives for modeling magnetic losses under alternating and rotational magnetization conditions, Journal of Magnetism and Magnetic Materials, 169071, https://doi.org/10.1016/j.jmmm.2022.169071

93. Zurek S., Hall J., Kutrowski T., Cheer A., Experimental verification of 2.4 kVAr and 12 kVAr prototype variable inductors controlled by virtual air gaps with magnetic orthogonality, IEEE PES Transactions on Power Delivery, 2021, https://doi.org/10.1109/TPWRD.2022.3162174

94. Fagan P., Ducharne B., Zurek S., Domenjoud M., Skarlatos A., Daniel L., Reboud C., Iterative methods for waveform control in magnetic measurement systems, IEEE Transactions on Instrumentation and Measurement, vol. 71, 2022, pp. 1-13, Art no. 6006113, https://doi.org/10.1109/TIM.2022.3199198

95. Szozda Z., Zurek S., Safe Handling of Magnets in the Conservation and Display of Works of Art, AIC News, Vol. 47 (6), November 2022, pp. 27-29,link

96. S. Zurek, Performance of closed-form equations for force between cylindrical magnets over wide range of volume, aspect ratio, and force, Journal of Electrical Engineering, Vol. 73 (2022), No. 6, 2022, pp. 404-411, https://doi.org/10.2478/jee-2022-0055

97. Z. Szozda, Magnets in Conservation, Restoration and Display of Works of Art, Copenhagen, 2023, ISBN 9788396785602 (Magnetic consultancy by S. Zurek) (link)

98. Z. Szozda, S. Zurek, Guidance on the safe use of magnets in conservation and display of works of art. Occupational and general public exposure to static and varying magnetic fields.” Abstract accepted to be presented at the AIC 51st Annual Meeting 2023 Jacksonville Conservation in the Age of Environmental, Social, and Economic Climate Change, Florida, USA, (link)

99. S. Divac, M. Rosić, S. Zurek, B. Koprivica, K. Chwastek, M. Vesković, A Methodology for calculating R-L parameters of nonlinear hysteretic inductor model in time domain, MDPI, Energies 2023, 16, 5167. https://doi.org/10.3390/en16135167, (PDF link)

100. S. Zurek, S. Divac, K. Chwastek, B. Koprivica, Calibration of magnetic field sensor - PCB-based H-coil, 16th International Conference on Applied Electromagnetics – ПЕС 2023, August 28-30, 2023, Niš, Serbia, (link)

101. Z. Szozda, S. Zurek, Magnets in Conservation, Restoration and Display of Works of Art, Analytical calculations of mechanical forces between magnets and single-pigment paint layers, in preparation

102. S. Zurek, Approximative geometrically-combined bi-planar convection and radiation boundary for thermal calculations in FEM, TechRxiv, 22 Dec 2023, https://doi.org/10.36227/techrxiv.170326728.83272688/v1

103. Z. Szozda, S. Zurek, Magnets in Conservation, Restoration and Display of Works of Art. Graphite in Magnetic Fields, submitted to Journal of the American Institute for Conservation

104. K. Chwastek, Ł. Mruk, B. Koprivica, M. Rosić, R. Gozdur, S. Zurek, An approach to describe anisotropic magnetic properties of electrical steels, submitted to MDPI Energies

105. Magnetic Polarity Indicator and Strength of the Magnet

106. Welding, in preparation

1. Zurek S., Mynott S., Hammett D., Gosford O., Double-clamp earth tester device, Megger Ltd, 2010, US2010/0283491, link (abandoned)

2. Zurek S., Hall J., University College Cardiff Consultants Ltd, Inductor (Variable inductor), GB1104177.9, 2012, link (abandoned)

3. Zurek S., Clark S., Francis I., Chin F., Transformer (Planar flyback transformer system with low turns ratio and high voltage output), Megger Instruments Ltd, GB2517015A, 2015, link (g1)

4. Zurek S., Francis I., Clark S., Chin F., Tutton M., Differential current transformer, Megger Instruments Ltd, GB2525692, 2015, link (g2)

5. Courtney A., Zurek S., Haynes S., Test apparatus and method for testing an electrical property of a fluid, Megger Instruments Ltd, GB2539674, 2016, (also: US10060871, HK1253704, , EP3314243, ES2754499, CN107923861, WO2016207619) link (g3)

6. Pluta W., Rygal R., Zurek S., System for measuring alternating voltage with galvanic separation (in Polish: Układ do pomiaru napięcia przemiennego z separacją galwaniczną), PL229896, 2018-09-28 link (g4)

7. Zurek S., Flexible current sensor, GB2562278, 5 Jun 2019, (also: WO2018206953, EP3635415, US11009537) link (g5)

8. Zurek S., Jones J., Meter for measuring an electrical parameter, GB2562720, 18 Dec 2019 (also: EP3635416, WO2018211247, AU2018268340, CA3063814, US2020096544), link (g6)

9. Zurek S., Current sensor (Current sensor with core of overlapping elements), GB2562279, 29 Apr 2020, link (g7)

10. Zurek S., Hadley M., Wardak R., Yarwood J., Zarb A., Test apparatus, GB1803842.2, 12 Mar 2018 (abandoned)

11. Zurek S., Jones J., Hadley M., Electrical plug and methods for testing an electrical mains socket and an electrical mains plug, GB2576294, 23 Dec 2020 link (g8)

12. Zurek S., Jones J., Switched mode power supply, GB2578931, 13 Jan 2021 link (g9)

13. Zurek S., Test apparatus (Flexible electric current sensor with descreet core), GB2579019, 3 Nov 2021 link (g12)

14. Aaronovitch S., Zurek S., Multi-use test lead, GB2579027, 9 June 2021, link (g10)

15. Wardak R., Zurek S., Conductive probe, GB2581129, 04 August 2021 link (g11)

16. Zurek S., Jones J., Chin F., Measuring loop resistance, GB2591998, 18 August 2021, (also: WO2021156608) link (g13)

17. Zurek S., Swinerd P., Tutton M., Wardak R., Taylor C., Measurement apparatus, GB2616874, application, 2023-09-27

18. Zurek S., Measurement apparatus, GB2616875, application, 2023-09-27

19. Szozda Z., Rygał R., Zurek S., Podkładka magnetyczna zwłaszcza szkicownika, P.444205, 2023

20. Zurek S., Jones J., Meter for measuring an electrical parameter, US11906554, 2024-02-20 link (g14)

20. Zurek S., et al., in preparation

21. Zurek S., et al., in preparation

• Szozda Z., Rygał R., Żurek S., Rozik M., Rama krosna malarskiego, W.130777, 2022-05-10
• Szozda Z., Rygał R., Żurek S., Pasierb P., Przyrząd do mocowania płóciennego podobrazia na krośnie malarskim, W.130782, 2022-05-12
• Z. Szozda, R. Rygał, S. Żurek, Podkładka magnetyczna zwłaszcza szkicownika, W.131862, 2023-12-17

• Hadley M., Zurek S., Newman S., 004735983-0001, (14.04, Graphical user interfaces), link
• Rygał R., Szozda Z., Żurek S., 008939201-0001, (10.04, Magnetic field indicators), link

Additionally, some articles published a quarterly Electrical Tester by Megger (circulation around 18k, UK, US, Australia, India, France):

1. Zurek S., Magnetic materials, Electrical Tester, Megger, Jan 2009, p. 6
2. Zurek S., Hysteresis loops and magnetic properties, Electrical Tester, Megger, Apr 2009, p. 6
3. Zurek S., Current transformers, Electrical Tester, Megger, Jul 2009, p. 6, link
4. Zurek S., Magnetic losses, finances and environment, Electrical Tester, Megger, Oct 2009, p. 5, link
5. Zurek S., Electrical steels, Electrical Tester, Megger, Jan 2010, p. 6, link
6. Zurek S., Wireless energy transfer, Electrical Tester, Megger, Apr 2010, p. 6, link
7. Zurek S., Magnetic core technologies, Electrical Tester, Megger, Jul 2010, p. 6, link
8. Zurek S., How safe is magnetic field?, Electrical Tester, Megger, Oct 2010, p. 6, link
9. Zurek S., Magnetic losses and efficiency in magnetic materials, Electrical Tester, Megger, Oct 2010, link
10. Zurek S., Magnetic shielding, Electrical Tester, Megger, Jan 2011, p. 6
11. Zurek S., Rotational magnetisation, Electrical Tester, Apr 2011, p. 6
12. Zurek S., Sunspots, mobile phones and electric kettles, Electrical Tester, Oct 2011
13. Zurek S., Magnetics and safety of electrical instruments, Electrical Tester, Jul 2012
14. Zurek S., Tan delta in magnetics?, Electrical Tester, Jan 2013 link
15. Zurek S., Current transformers in electrical diagnostics (Part 1), Electrical Tester, Nov 2015, link
16. Zurek S., Current transformers in electrical diagnostics (Part 2), Electrical Tester, Mar 2016, link
17. Zurek S., The many faces of loop testing, Electrical Tester, Jul 2018, link
18. Zurek S., Milner D., What is a knee point?, Electrical Tester, Aug 2021, link
19. Zurek S., DLRO, in preparation
20. Zurek S., Inductance, in preparation

• 2003 - ISEM, Versailles, France
• 2003 - SMM, Düsseldorf, Germany
• 2003 - UK Magnetics Society seminar, London, UK
• 2004 - UK Magnetics Society seminar, Cardiff, UK
• 2004 - EMSA, Cardiff, UK
• 2005 - UK Magnetics Society seminar, London, UK
• 2006 - LabVIEW in the Curriculum, Dublin, Ireland
• 2006 - 1&2DM, Częstochowa, Poland
• 2006 - Sympozjum Pomiarów Magnetycznych, Częstochowa, Poland
• 2007 - Compumag, Aachen, Germany
• 2007 - UK Magnetics Society seminar, Cardiff, UK
• 2007 - SMM, Cardiff, UK
• 2007 - ENDE, Cardiff, UK
• 2007 - Women's Engineering Society Conference, Cardiff, UK
• 2007 - UK Magnetics Society seminar, Birmingham, UK
• 2008 - Intermag, Madrid, Spain
• 2008 - 1&2DM, Cardiff, UK
• 2011 - CWIEME, Berlin, Germany
• 2011 - SMM, Kos, Greece
• 2014 - 1&2DM, Turin, Italy
• 2015 - UK Magnetics Society seminar, Portland Bill, UK
• 2015 - Coiltech, Pordenone, Italy
• 2016 - Symposium of Magnetic Measurements, Siewierz, Poland
• 2017 - Insucon, Birmingham, UK
• 2018 - 1&2DM, Grenoble, France
• 2022 - 1&2DM, Cardiff, UK
• 2023 - IET HVET, Manchester, UK (High Voltage Engineering and Testing)
• 2023 - IET, EVI, Glasgow, UK (EVI: Charging Ahead)

• 2011 - Current transformers - design aspects and industrial applications, Cardiff University, UK
• 2008 - UK Future TV

• 2019-present, Editorial Board of the Ukrainian journal Electrical Engineering and Power Engineering
• 2020-present, Editorial Review Board of IEEE Magnetics Letters
• 2022-present - Guest Editor for MDPI Magnetic Sensors Applications: Status, Challenges and Perspectives

• 2004 - EMSA, Cardiff, UK
• 2006 - 1&2DM, Częstochowa, Poland
• 2007 - SMM Cardiff, UK
• 2008 - 1&2DM, Cardiff, UK
• 2016 - Symposium of Magnetic Measurements, Siewierz, Poland (Scientific Committee)
• 2023 - SMMM Zakopane, Poland (Scientific Committee)
• 2024- Magnetism and Magnetic Materials Research Conference MagMatResCon2024, link

• 2018 - Trade tool of the year for MFT1741, UK Electrical Industry Awards
• 2023 - Gold winner for product MFT-X1, MUSE Design Awards, category Product Design / Engineering
• 2023 - Silver winner for product MFT-X1, MUSE Design Awards, category Product Design / Industrial

• https://www.webofscience.com/wos/author/record/J-1199-2019

• List of projects and designs by Stan Zurek

• LTspice

. .

.

.

http://e-magnetica.pl/downloads/aNETka_2.1.zip